Anemometers and Windvanes in action!

Windspeed Ltd (Vector Instruments), 115 Marsh Road, RHYL, N. Wales, LL18 2AB, United Kingdom.
Windspeed Limited (trading as Vector Instruments)
Click for info on: Wind Speed sensors Click for info on: Wind Direction Sensors Click for info on: Masts + Mountings Click for info on: Air Temperature sensors Click for info on: Masts + Mountings
 Sunday, April 30 2017  Home   Calibration Search site:  

Latest Weather...
(Rhyl, N.Wales, UK)
Wind Speed:  7.3 mph
Wind Direction:  189 °
Air Temp.:  10.3 °C
Rel. Humidity:  69.7 %
Rain (last Hr):  0.0 mm
(updated at: 01:13 UK time)

  • Home
  • Contact Us
  • Products
  • Applications
  • Calibration
        MEASNET / IEC
  • Repairs/Spares
  • Support
  • Useful Information
  • Help... (F.A.Q.s)
  • Downloads
  • Site Search
  • Manuals/Datasheets
  • Wiring/Connections
  • RoHS
  • Wind Assessment
  • Links, Reports and Papers
  • About Vector Instruments


    Please call/email us if you need:
  • product installation help
  • wiring/connection info
  • product datasheet/manual
  • price/availability info

  • Click
    to translate
    this page using:
    Google
    Notes:
    This website requires Javascript and Cookies to be enabled for correct operation. Privacy Policy...
    Use subject to Terms & Conditions.
    *** Celebrating more than 40 years manufacturing & servicing High Quality Vector Instruments Anemometers and Windvanes at Windspeed Ltd ***
    Anemometer Calibration
     
    All anemometer rotors are individually calibrated in our wind-tunnel at a single windspeed (9m/s) by comparison to one of a set of reference rotors which are themselves traceable to national standards.

    The reference rotors are themselves periodically re-calibrated at reputable wind tunnels (such as those in the MEASNET group).

    MEASNET and NIST calibrations are also available to special order for customers requiring them (such as those with applications in the wind power sector).

    Note that few other anemometer manufacturers provide an individual calibration as standard for every anemometer they make.

    More information:

  • MEASNET
  • Anemometer Classification and IEC 61400-12-1
  • Selecting A100 Series Anemometers for Wind Turbine Testing and Wind Farm Site Assessment
  • Independent Research Reports
  • FAQ question/answer: What is the difference between your "factory calibration" and a "MEASNET calibration" ?
  • FAQ question/answer: How can Slope/Offset figures be obtained from Calibration Data (Green RCD-10 Cal Sheet) for Anemometers/Rotors?


  • Selecting a Wind Tunnel and Calibration:
    We consider that a low-turbulence wind tunnel with uniform flow and a test section (cross-section) of at least 60cm x 60cm (24in x 24in) is the minimum required for meaningful/accurate calibrations of our anemometers. The MEASNET/IEC calibrations we offer all use wind tunnels meeting/exceeding these requirements.

    Please contact our sales office for calibration information on our anemometers (and/or for a copy of the independent summary report on the classification of our anemometers).

    Windspeed Ltd (Vector Instruments)
    Windspeed Limited (trading as Vector Instruments),
    115 Marsh Road, RHYL, North Wales, LL18 2AB, United Kingdom
    Tel: +44 (0) 1745 350700   Fax: +44 (0) 1745 344206
    Email: sales@windspeed.co.uk
     
    Website design and content is copyright (c) 2003-2016 Windspeed Limited (unless otherise stated). All trademarks are acknowledged.
    Page Rendered in: 0.723826 seconds. - Powered by Mambo.