|
|
|
|
|
| Repairs/Spares |
| |
|
Maintenance, Repair and Recalibration services
are now available direct from the original Manufacturer
for all Vector Instruments anemometers/windvanes.
The "Vector Instruments (Windspeed Ltd)" factory at Rhyl in the U.K.
is the ONLY "Manufacturer Approved" Repair/Maintenance Facility
for Vector A100 Series Anemometers and W200 Series Windvanes
...let the experts in our factory maintain your sensors for
peak performance, accuracy, reliability and a long service life.
All Vector Instruments sensors are constructed in weather-resisting plastics, anodised aluminium and stainless steels for a long service life.
If an instrument/rotor is damaged, or a problem develops, or if you wish to bring some old instruments back into service, we also offer a complete repair and re-calibration service for all instruments of our manufacture.*
Regular maintainance, servicing and recalibration ensures that the instruments you purchase from us continue to perform to their full specification.*
Note: Dis-assembling an anemometer for maintenance (e.g. to change the bearings) will invalidate any MEASNET calibration. We have been advised by MEASNET that their calibrations are normally only valid for 12 months in the field (assuming the anemometer is installed within 6 months of the calibration test). In high-accuracy applications, we advise that anemometers be returned to us for maintenance/overhaul between deployments - we can arrange for a new MEASNET calibration after maintenance/overhaul where required.
|
|
|
|
For those customers with the facilities to maintain/calibrate instruments themselves, service/spares kits are available for most standard instrument types. Consumables are normally available from stock**.
* Please contact us for details of these services.
** You will need to specify the type and serial number of each instrument so that we can determine the correct service/spares kits required.
|
|
|
|
|
|
|
Windspeed Limited (trading as Vector Instruments),
115 Marsh Road, RHYL, North Wales, LL18 2AB, United Kingdom
Tel: +44 (0) 1745 350700 Fax: +44 (0) 1745 344206
Email: sales@windspeed.co.uk
|
|
Website design and content is copyright (c) 2003-2010 Windspeed Limited (unless otherise stated). All trademarks are acknowledged.
|
|
A100 Series Anemometers